ISCG Adapter - All Bikes

Pay as little as C$0.8 per month with Paybright Logo

Add to cart

If the product is not in stock, contact us for availability.

In stock
  • Details
  • If you want to mount a chain guide on your Ibis, you will need one of these.

    When using SRAM DUB cranks along with the ISCG plate on a RipMo or any frame with a 73mm bottom bracket shell width, you will need the SRAM DUB 2mm spacer inside the drive side crank arm against the bottom bracket shell.

    Adapter thickness is 2.5mm; when accounting for BB spacing on the drive side

    GXP Sram 68= 2.5mm spacer DriveSide and 2.5mm on NonDrive side
    GXP Sram 73= No spacer - just cups to frame

    Dub Sram 68=2.5mm DS / 2.5mm ND NOTE: There is a 4.5mm spacer required that goes between DS crank and outside of BB cup.

    Dub Sram 73= NO SPACERS under bb cups, 4.5mm spacer between DS crank and outside of BB cup *If using the ISCG adapter then the IBIS will need to get you a 2mm spacer to replace the 4.5mm spacer

    Shimano 11 & 12 speed 68= 5mm DS / 2.5mm ND
    Shimano 11 & 12 speed 73= 2.5mm DS / none ND

    RaceFace NextR 12S 68= 3.75mm DS / 2.5mm ND
    RaceFace NextR 12S 73= 1.25mm DS / none ND


    Compatible with...

    • Mojo HDR
    • Mojo HD 3 - 5
    • Mojo 3 - 4
    • Ripley 4
    • Ripley AF
    • Ripmo 1 - 2
    • Ripmo AF